Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Wellington Homeowners
A torsion or extension spring can give way without much warning. One morning the door won’t lift, or it comes down hard and won’t stay up. In Wellington, that usually happens on a door that’s been working quietly for years, and it tends to happen at the worst moment. Getting it fixed safely is not a job for a ladder and a pair of gloves; spring repair is the most dangerous part of any garage door system, and it needs a trained technician.
Our technicians have up to 11 years of experience, and we handle broken spring repair, torsion and extension spring replacement, adjustment, and safety cable work on the door and opener brands already in your garage. If your door’s down, call us and we’ll get you booked for same-day repair where the schedule allows. Call (844) 913-0920 to set up a free estimate.
What Our Garage Door Spring Repair Service Includes
Every spring job starts with a full inspection of the door, not just the part that snapped. A broken spring often goes along with worn cables, stretched or damaged drums, or rollers that are binding, and fixing only the spring on a door with other wear just moves the problem down the road. Here’s what our service covers.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on a metal shaft above the door, and it carries the full weight of the door as it opens and closes. When it breaks, the door usually can’t be lifted by hand or by the opener, and forcing it can bend tracks or burn out the motor. We measure the old spring’s wire size and length, match the replacement to the door’s weight, and set the correct number of turns so the door balances properly. Most doors in Wellington have two torsion springs, and when one fails the other is usually near the end of its life, so we’ll tell you honestly whether replacing just one makes sense.

Extension Spring Replacement
Extension springs run along the horizontal tracks on either side of the door, stretching and contracting as it moves. They’re common on older doors and lighter single-car setups, and they fail differently than torsion springs, often with a loud snap and a door that drops partway. When a door is right for extension springs, we replace the pair, check the pulleys and cables they attach to, and confirm the door is balanced before it goes back into service.

Broken Spring Repair
A broken spring is the call we get most, and it’s almost always an emergency because the door simply won’t work. The break is usually visible as a gap in the coil, and it almost always happens while the door is closed, which can leave a car trapped inside. We diagnose the failure, confirm whether it’s a single spring or a pair, and get the door working again, usually in one visit. If you need garage door repair for a related issue like a jumped cable or a bent track, we handle that at the same time.

Spring Adjustment
Not every spring problem is a break. A spring that’s lost tension makes the door feel heavy, causes the opener to strain, or leaves the door creeping down on its own. Adjustment means resetting the spring tension to match the door’s actual weight, which is measured with a scale, not guessed at. If your door feels different than it used to, an adjustment can often prevent a break before it happens.
Safety Cable Installation
Safety cables run through the center of extension springs so that if the spring breaks, the pieces are contained instead of flying across the garage. Older doors sometimes don’t have them, and that’s a real safety gap. We install safety cables as part of extension spring work and can add them to a door that’s missing them.
Spring Inspection
A spring inspection is a visual and hands-on check of the springs, cables, drums, and rollers, plus a balance test with the door disconnected from the opener. We look for gaps in the coils, rust, stretched cables, and uneven wear between the two sides. It’s the fastest way to find out whether you’re a month away from a breakdown or your door is in good shape.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
We work with Wayne Dalton equipment, which shows up on a lot of the newer construction in Wellington. Their doors use their own spring and hardware configurations in some models, and knowing what’s inside means we bring the right parts and don’t guess. We also service Craftsman doors and openers, which are common on doors installed decades ago and often still running with original springs. If your opener is a Craftsman, the door and lift system are matched, and we check both before we touch the springs.
On the installation side, Raynor and LiftMaster systems come through our shop regularly. Raynor’s commercial-grade construction is common on larger residential doors, and LiftMaster openers are among the most common in newer homes. Either way, we know how they interact with the spring system so the repair solves the problem at the source. Whether you have Wayne Dalton, Craftsman, Raynor, or any other make, we can help. Learn more about our broader Wellington Garage Door Repair Co services if you need work beyond springs.
Signs You Need Garage Door Spring Repair Right Now
- The door won’t open by hand. Disconnect the opener and try to lift the door yourself. If it feels like lifting a small car, the spring isn’t carrying its share of the weight. Don’t force it; that’s how tracks get bent.
- You hear a loud bang from the garage. A spring breaking sounds like a firecracker or a small explosion. If you heard it and the door stopped working, the spring is almost certainly broken.
- The door slams down or creeps up on its own. A door that drops hard, or drifts down when left partway open, is unbalanced. The springs are either broken or badly out of adjustment.
- The opener is straining or the door moves unevenly. If the motor sounds like it’s working harder than it used to, or the door tilts as it lifts, the spring tension is off. The opener is trying to make up for a spring that’s no longer doing its job.
- Visible gaps in the coil or rust on the springs. Look at the spring above the door. A gap means it’s broken; heavy rust or stretched coils mean it’s on the way out. Catching it early means you’re not stuck with a dead door.
Our Garage Door Spring Repair Process – Step by Step
- 1
We take your details on the phone. We ask about the door, the opener, and what it’s doing, so we arrive with the right parts. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
- 2
We diagnose first. On arrival, we test the door by hand with the opener disconnected, measure the door’s weight, and inspect the springs, cables, drums, and rollers. We use a scale, not an eye test, to determine the correct spring for your door.
- 3
You get a written estimate before any work starts. We explain what’s broken, what needs replacing, and what it’ll cost. The price is quoted and agreed before we touch anything.
- 4
We do the repair safely. Torsion springs require winding bars, proper winding techniques, and a careful release of tension. We replace the spring or springs, set the correct tension, and install or inspect safety cables.
- 5
We test the door and show you the result. We run the door through several full cycles, check balance, verify the opener’s safety reverse works, and walk you through what we did before we leave. That’s the same care we bring to any garage door spring repair job we take on.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Wellington?
Garage door spring repair in Wellington typically runs $180 – $340 for a single spring, depending on the type and size. That’s the range for one spring. Most doors have a matched pair, and when both springs are replaced together the cost is roughly twice that range. A typical torsion spring replacement on a two-spring door falls at the upper end, while a single extension spring repair sits closer to the lower end.
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| Opener Repair | $120 – $320 |
| Garage Door Repair (general) | $150 – $600 |
What moves the price: the type of spring, whether it’s one or a pair, the height and weight of the door, and any wear we find in the cables, drums, or rollers while we’re in there. Choosing a repair over a replacement also keeps the cost down. What keeps you from overpaying is a written estimate before work begins and a technician who measures the door instead of guessing. Our free estimate covers the full inspection, a clear explanation of what’s needed, and a written price. It also gives you a chance to ask about garage door opener repair if the motor is showing strain. The written estimate sets the final price.
Garage Door Spring Repair Near Wellington – Our Service Area
We take spring repair calls throughout Wellington and the surrounding area, including Royal Palm Beach, Loxahatchee Groves, Greenacres, The Acreage, Haverhill, Palm Springs, and Royal Palm Estates. Drive times to most of these spots are short, which means a broken spring reported in the morning can often be handled the same day. For work in the neighboring towns, see our garage door spring repair page covering Loxahatchee Groves and the surrounding communities.
Serving Wellington, FL – Our Local Coverage Area
We serve Wellington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Wellington
Garage door spring repair is the replacement or adjustment of the springs that counterbalance your door’s weight. The springs do most of the lifting, so when one breaks or weakens, the door becomes too heavy for you or the opener to move safely. Repair means matching a new spring to your door’s weight and setting the correct tension so the door balances properly. It’s not a maintenance task most homeowners should attempt; the tension in a wound spring can cause serious injury if released incorrectly. Call (844) 913-0920 to have a trained technician handle it.
Most spring repairs take about one to two hours once the technician arrives, though a two-spring replacement or a job that includes cable work can run longer. The time depends on the door’s size, the spring type, and whether we find related wear. We diagnose first, so the estimate we give you includes the full scope of the work. Call (844) 913-0920 to book a visit and we’ll give you a realistic window.
Spring repair in Wellington typically costs $180 – $340 for one spring, and a matched pair usually runs about twice that since both springs are normally replaced together. The final price depends on the spring type, the door’s weight, and any cable or roller work needed. We quote in writing before any work starts, so there are no surprises. Call (844) 913-0920 for a free estimate.
Yes. We service Wayne Dalton and Craftsman doors and openers, along with LiftMaster, Chamberlain, Genie, Clopay, Amarr, and Raynor. Each brand has its own spring configurations and hardware, and our technicians know where each one tends to wear out. That means we arrive prepared for what’s actually in your garage. Call (844) 913-0920 and tell us what you have.
Often, yes. Same-day spring repair is available where the schedule allows, and spring failures are our highest-priority calls. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening. Call (844) 913-0920 and we’ll tell you what’s available.
We stand behind our spring work. The specific warranty terms are explained in your written estimate, so you know exactly what’s covered before the work begins. Ask about it when you call and we’ll go over the details. Your written estimate sets the final price and the coverage.
Clear the area around the door and make sure we can access the garage. Don’t try to lift or operate the door once you know the spring is broken, since the door can come down unexpectedly. If a car is trapped inside, let us know when you call so we can plan the visit. Call (844) 913-0920 and we’ll walk you through what to expect.
Schedule Your Garage Door Spring Repair Service in Wellington Today
If your door won’t lift, or you’ve heard the snap of a broken spring, don’t wait. Call (844) 913-0920 for a free, no-obligation estimate on spring repair in Wellington. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians diagnose the door, quote the price in writing before work starts, and get you back to a safe, working door.
Written by the team at Wellington Garage Door Repair Co.